Home Leakage Solutions for Damp Walls near the floor

I have damp walls on my premises. This is all over and largely concentrated close to skirting and at the base of door frames.
I think this is just normal, salt in the sand, bad construction, and this is similar to the experience of people I have spoken to. They share that it's worse in their premises. Should I live with it? Well, no, never actually.

Damp walls in the lower half of your premises close to skirting. Is leakage from the premises close to skirting is leakage from the wet rooms of your place. This is likely due to

wet rooms (i.e bathroom or kitchen) of your place. This is likely due to bad workmanship or leakage in plumbing lines or both, to add to this general wear and tear of wet room surfaces if minor issues are left unattended.

The solution is simple. Hire a leakage detection expert who can identify the extent of the leakage. Diagnose the actual sources of leakages and suggest a road map to resolve the various leakage issues with minimal damage to existing facilities and provide corrective treatment for the source area as well as the affected area so that a proper long-term solution can be provided and you can restore your premises to past glory.

For all damp wall leakages due to sources within your premises and affecting the lower half of the walls. Get in touch with https://leakproof.in/ for the solutions.

Waterproofing Services in Mumbai for Ceiling Leakage

Waterproofing Services in Mumbai for Ceiling Leakage

Ceiling leakage is the last thing a person can wish for in a dream home or office. While there can be several reasons for the leakages from the ceiling, the presence of wet-room or planters is the most common source of perennial leakages in the buildings.

We often hear people say, that we have tried everything. Connecting with the developer who comes with their team to resolve the leakages, local service providers like plumbers, mason but the issue does not get resolved.

There is temporary relief in certain cases based on corrective actions/treatments on upper floors but sooner or later the issue recurs more profound and with greater speed.

It is important to thoroughly understand the pattern of leakage which can be done using the thermography process.

 This in turn helps us to identify the source of leakage as visible in the affected areas. Resolving the leakage is only like joining the dots based on the actual issues of the lower floor and the corresponding source points in the upper floors/s.  Leakage sources including adjacent areas may be contributing to the overall leakage in the affected ceilings.

For along long-term solution to leakages in your home/office do contact www. leakproof. in, we render waterproofing services in Mumbai metropolitan region and live a leakage-free life.

← Previous Post

Three Fold Solutions for Leakages from Skirting

 Dampness in the wall is a common experience in most buildings, especially near the skirting at floor level. Wall dampness is initially ignored and later takes the shape of a full-blown problem of dampness up to 3’0” which is now within the range of our view especially when we are seated.

It has by now spread to several locations, there is likely microbial bacteria growth and, in some cases, de-bounded of the plaster surface.

The dampness in walls that have risen to the level of 3’0” height and above needs a -

Threefold solution based on the inspection in wet rooms as follows:

1. 1. 1. Checking all water supply lines using pressure testing gadgets or ultrasonic gadgets.
      2. Inspect all drain lines using a thermal scanner.
      3. Inspecting all tile joints using moisture meter.

Treatment of damp walls based on survey involves solving leakages in plumbing lines.

Water supply and drain, floor tile joint filling.

and

Injection grouting is based on the extent of seepage through open joints and hollowness

within tiled surfaces

And finally, replastering of the affected wall surfaces by removing existing plaster, coating the wall (brick-block) with cementitious polymer coating, providing injection grouting if required and replastering the surface.

Tank Waterproofing of Building

 Waterproofing the water tank which holds potable drinking water.

Watch how Tank waterproofing can be done :https://www.youtube.com/watch?v=d12xbZwtMW0

Water Tanks  be it underground or overhead, are an essential facility in building. The design and construction of water tanks ensure effective use and prevents leakages. As the building ages there is a wear and tear in the structure and water tanks are no exception.

The water tanks hold large quantity of water which is potable and hence it is essential that no external water arising due to rain or sub-soil water should enter the tanks . Also, the water in the tanks should not leak in the outside surface.https://www.youtube.com/watch?v=d12xbZwtMW0

The absorption of water into the tanks can be prevented by sealing the cracks and joints from outside whereas the inaccessible portion can be sealed by adequate injection grouting. These works are advisable to be carried out by expert waterproofing contractor.

The internal surfaces of the tank are susceptible to the wear and tear due to the constant filling and usage of water on a daily basis. These surfaces viz tank base ,peripheral wata and walls should be cleaned of all loose materials, cracks opened and thorough cleaned and filled with adequate waterproof sealants.

Post crack filling the cementitious coatings should be applied in 2 coats and the tank filled with water for a minimum period of 48 hours to check the effectiveness of the treatment.

The right choice of waterproofing materials and skilled application are important aspects of water tank waterproofing systems.

Leakages from the bathroom due to gaps in the tile joint

 Wet room is a room too. We are selective about the floor and wall tiles that Adour the wet rooms, viz toilets, balconies of our homes. Aesthetics plays an important part in the choice of tile, colour, size, texture and more, while the laying of tiles on the floor especially its joints are left almost always to the skill and intent of the (Karigar) tile setter in this case.

Ideally, floor tiles in wet rooms should be placed with a gap of 4/6 mm between joints. This gap is achieved using spacers. The benefit of providing tile gaps are:

It takes care of manufacturing errors in tile and bends especially on edges.

Leakages from the bathroom due to gaps in the tile joint
If the situation arises, it is easy to replace a tile W/o impacting the adjoining tile.
It takes care of expansion and movement on the tile floor.
  

Gaps in the tiles lead to leakages from the bathroom or any wet area. to read more click on the link: https://leakproof.in/leakages-in-the-bathroom-due-to-gaps-in-the-title-joint/

Leakages in Modern High Rise Building

Modern High-Rise buildings have typical floor plates stacked one above the other.

The location of wet rooms, viz toilets, kitchens, dry balconies are built around a central core with the passage in between and habitable spaces around it.

In case of leakages in the ceiling of habitable spaces, the obvious link of source of the leakage is sought at the floor above.

Typical ways of resolving leakage issues are by checking for pressure drops in water supply lines to ascertain leakage in the pipes and posting that to check for drain lines and floors.

Conventional solutions involve breaking tiles- floor/wall or both as the situation demands, resolving pipe leakage if any, redoing waterproofing and finally relaying the tiles.

In recent times it has been noticed that this system of leakage resolution gives temporary or no relief in certain cases. It is advised to break tiles only and only if all other options are ruled out and not as the first line of defence.

Modern technologies assist in mapping the likely source of leakage to the exact spot assisting in minimal works resulting in saving of time and convenience.

This can be done by a waterproofing expert with gadgets like Thermal Scanner Moisture Meter, and even Wall and Floor Detector.

An important aspect to note is that, while we may resolve the leakage for now.

The fact that the water found its way through the structure and resulted in leakage below indicates the presence of gaps or passageways.

In short, we can say that the waterproofing is porous.

In such a situation it is advised to carry out injection grouting in the source area as well as in the affected portions of the lower floor to ensure complete sealing of gaps and passageway, which may be existing due to a combination of reasons rising during the construction stage.

We at Leakproof.in provide solutions for all types of internal leakages without breakage.

 

Professional Bathroom Waterproofing Services in Mumbai

 

An unkempt or defective bathroom can be an inconvenience, but it can also lead to larger issues that damage your home. If you have bathroom leakage issues and you need bathroom waterproofing services in Mumbai, don’t hesitate to call us immediately to schedule an appointment. Our experienced team will assess your bathroom and determine the best course of action for fixing leaks and other issues, so you can enjoy your bathroom again! Call today!

Different leakage issues in the bathroom:

Internal Leakage

Property owners tend to ignore bathroom leakages and internal leakage problems, which only increases their severity over time. It’s best to address bathroom waterproofing services at an early stage to save yourself from major repairs later on. If you notice any of these signs of a leak, call professional services immediately.

 

External Leakage

The first and foremost thing to be kept in mind while doing bathroom waterproofing is external leakage. Since a lot of water flows from toilets and bathtubs, there are several possibilities of external leakage through pipes and walls. For completely stopping these types of leakage, experts suggest using anti-leak coatings to reinforce porous surfaces. Apart from it, micro-porous membranes can also be used for preventing seepage.

 Enquire Today

As we have over 15 years expertise in bathroom waterproofing solutions. We at Leakproof.in offer high-quality services at affordable prices. Our unique approach to internal water leakage detection and repair has garnered us with over 1000+ satisfied customers

Services Overview

Our expert technicians are able to identify the exact reason for leakage. For detection we have moisture meter, thermal scanner and also pipe detector. We offer a wide range of leakage solutions without breakage with minimum mess. If required we have injection grouting and reverse injection grouting machine for curing leakage.

 

Contact Us