Waterproofing is a critical process that is carried out to ensure your home is safe from leakage and remains beautiful and structurally strong throughout its lifetime. However, it is important to make sure the entire waterproofing process is carried out in a professional manner and all the essential checks and necessary steps are taken. Surface preparation is a critical process to be done before actual waterproofing takes place and goes a long way in bringing out the right effect.
The process of surface preparation is given importance by most Waterproofing experts in Mumbai so let us check out the tips to do it. Skimping on this may lead to a direct impact on the waterproofing quality. The foundation wall or flooring should be smooth, clean and free of any loose material so do this prior to beginning with the waterproofing.
• Check the entire area that has to be waterproofed and identify any problems that could crop up later like water on footings, pipe penetrations not prepared, footings not dugout etc. Work on them quickly to avoid future hassles.
• Scrape off all the loose and excess material from walls and flooring and get rid of any protrusions in them. Anything that is not bonded with the concrete will come off easily and give a firm footing to waterproofing chemicals.
• Waterproofing materials are not designed to take care of large gaps. If there are too many large, wide cracks, fill it up with patching cement that is compatible with the waterproofing chemical.
• Remove any excess water on the area and also dry off any moist or wet areas with a propane flame to give a good dry surface for the waterproofing chemicals to bind with.
Professional Waterproofing contractors in Mumbai will vouch that for best results a clean and dry wall is the first requirement and will do everything to get this done. These small steps will ensure you get the desired results and there are no leakages in the immediate future.
The process of surface preparation is given importance by most Waterproofing experts in Mumbai so let us check out the tips to do it. Skimping on this may lead to a direct impact on the waterproofing quality. The foundation wall or flooring should be smooth, clean and free of any loose material so do this prior to beginning with the waterproofing.
• Check the entire area that has to be waterproofed and identify any problems that could crop up later like water on footings, pipe penetrations not prepared, footings not dugout etc. Work on them quickly to avoid future hassles.
• Scrape off all the loose and excess material from walls and flooring and get rid of any protrusions in them. Anything that is not bonded with the concrete will come off easily and give a firm footing to waterproofing chemicals.
• Waterproofing materials are not designed to take care of large gaps. If there are too many large, wide cracks, fill it up with patching cement that is compatible with the waterproofing chemical.
• Remove any excess water on the area and also dry off any moist or wet areas with a propane flame to give a good dry surface for the waterproofing chemicals to bind with.
Professional Waterproofing contractors in Mumbai will vouch that for best results a clean and dry wall is the first requirement and will do everything to get this done. These small steps will ensure you get the desired results and there are no leakages in the immediate future.
No comments:
Post a Comment