Don’t ruin your kitchen with these tiling blunders

One of the most laborious tasks in the construction industry is that of tiling. They need to be carried out with a lot of planning and caution, applying the best of techniques. The complete look of your kitchen will be ruined if you do not take the right steps during the installation of tiles. The first rains will expose the amateur work done and lead to a lot of repairs.

That’s the reason why you should engage professional waterproofingcontractors in Mumbai for such critical work than pay for hefty repairs later on. Before you begin the makeover of your kitchen, check the following points to avoid any costly blunders:

Poor Planning: This mistake is easy to avoid by doing some pre-planning. One should measure the surface you need to tile instead of simply rushing into it. The lesser the cuts the fewer the chances of mistakes. The first tile is generally placed from near the kitchen door and then moved inside.

Choosing the wrong adhesive: Your expensive tiles can come loose and fall off its surface if you compromise by selecting a cheaper alternative of adhesive. Choose a crack-resistant adhesive that has been designed for waterproof tiling. Tiles are known to break and crumble as the wrong adhesive can let water seep in easily, even if the tiles have been fitted professionally.

Failing to water-proof the area: It is necessary to waterproof the area to be tiled or the kitchen surface. Leakage related damage can prove to be an expensive error and lead to unnecessary rework. Even if you have a tight deadline of completion, it is always advisable to begin tiling work only after the waterproofing is dry completely. Engage an agency that carries out external waterproofing in Mumbai for an authentic job.

Six common mistakes that can ruin your bathroom waterproofing

If there is one area in a home that is constantly exposed to moisture and water, it is the bathroom. This continuous exposure to water leads to dampness while improper tiling and cracks can cause water seepage to floors below and adjoining walls. It is during the construction phase that waterproofing should be carried out by professionals so this problem does not raise its head during later stages.

Engaging professional agencies who carry out external waterproofing inThane are the best bet. If this is not done, it could lead to expensive repair work and at times rebuilding of the entire structure. Check out the common bathroom waterproofing mistakes given below and avoid them while carrying it out in your home:

1.        Using inferior materials: Substandard waterproofing materials are bound to lose effect in a short time period as they do not last long. This results in leakages and seepages as they are suspect to developing cracks. Use quality material and insist on buying them and handing over to the waterproofing contractor if you are not sure of their integrity.

2.       Wrong application: If the application of the best quality waterproofing products is not carried out properly, your bathroom could still face leakage solutions. Every product has essential guidelines mentioned on its packaging and they should be followed diligently to get the right result.

3.      Substandard Labour: Despite having top quality material, if you have outsourced the job to a novice, it could still ruin your bathroom’s waterproofing in a jiffy. The products have to be applied properly and if the workers are not trained in their job or rush through it, it is a lot of money that will literally go down the drain.

4.      Insufficient Coats: Your bathroom may need several coats of waterproofing for it to have the desired effect. For complete waterproofing to take place, this has to be followed diligently. It can become a costly and difficult job if water seepage is noticed after the tiles are installed.

5.      Insufficient priming/drying time: Every coat needs to be dried properly so that its components fuse with the surfaces well. This leads to long lasting durability but if the priming/drying time is not adhered to, its effectiveness is drastically reduced. The surface on which the waterproofing coat has to be applied should be prepared or primed for use.

6.      Ineffective drainage: The angle or the slope of the bathroom floor is a critical factor while constructing the bathroom. If this isn’t properly maintained, it can lead to water collection and later cause seepage. Proper piping will ensure that water is drained out only through the pipes and keep other areas dry.

It is recommended to award the job to renowned bathroom leakage solutionsin Thane only for a thorough and professional job. Take care of these mistakes during the construction phase to avoid costly repairs later.